Customer Case

Key clients: Well-known listed companies such as Huawei Group, ZTE Group, Huahao, Huaying, Anke Xun, Foxconn, Dongshan Precision, Hisilicon, Cooper, Zhuhai Guoneng, Super Fusion, Mindray Medical, etc.
Cooperation Cases
Client Cases

Push-Type Aluminum Rivet 3.2*7.4

—— Achieve a More User-Friendly Installation Experience

Special high-strength aluminum alloy material, optimized deformation mechanics design for rivet body and ferrule. Through precision cold heading and heat treatment processes, ensure the preset clamping force and shear strength after single-sided riveting.
Application Scenarios: Circuit Boards, Chips

Push-Type Aluminum Rivet

SUS316 Dacromet Combined Screws

—— Achieve a Leap Forward in Anti-Corrosion Performance

Adopt top-grade austenitic stainless steel SUS316 as the base material. Dacromet (zinc-aluminum coating) treatment has far superior salt spray corrosion resistance compared with traditional galvanizing (up to 1000 hours or more), no hydrogen embrittlement risk and meets environmental protection requirements.

SUS316 Dacromet Combined Screws
Product Application Areas
Product Application Areas
Telecom Anti-Loose Screws
Telecom Anti-Loose Screws
Stainless Steel + Anti-Loose + Special Coated Material
  • Vibration Anti-Loosening Test
    After 50,000 vibrations, thread locking force retention ≥95%
  • Environmental Resistance Test
    50 high-low temperature cycles from -20℃ to 60℃, no cracking or peeling of resin layer
  • Salt Spray Test
    No rust after 720 hours of salt spray testing
Medical Precision Screws
Medical Precision Screws
Medical Grade Material + Ultra-Clean Process
  • Burr-Free Polishing
    Ultrasonic + mechanical polishing in clean room, surface roughness Ra≤0.2μm
  • Ultra-Clean Cleaning
    Residual contaminants ≤0.1μg/cm²
  • Corrosion Resistance Test
    Simulated medical disinfection environment, 500 consecutive disinfections, no rust or coating peeling
Robot Joint Screws
Robot Joint Screws
Titanium Alloy + Wear-Resistant Process
  • Wear Resistance
    5 million consecutive friction tests, coating wear ≤0.002mm, far below industry standards
  • Strength Test
    Shear strength ≥900MPa, tensile strength ≥250MPa, withstands 1.5x maximum robot joint load
Drone Body Screws
Drone Body Screws
Titanium Alloy + Anti-Loose Coating
  • Lightweight Design
    60% lighter than traditional carbon steel screws 60%
  • Anti-Fouling Test
    No adhesion after contact with engine oil or dust
  • Strength Test
    Tensile strength ≥240MPa, meets drone body load requirements
Performance Upgrade
Helps improve drone battery life by 15%